Double Sided Stockinette
So here's my current project. I'm doing a plain scarf (yawn) for a friend. Actually it's a guy in my girlfriend's prayer group, but it was a good excuse to learn a new technique. This time it's Double-Sided Stockinette.
Double-Sided Stockinette (hereafter "DSS" because typing "Double-Sided Stockinette" takes way too long and I'm tired of typing "Double-Sided Stockinette") is surprisingly easy. DSS produces a finished material that's twice as thick and looks like stockinette on both sides (I think it was named after the inventor: Mrs. DSS). It seems to end up being a little looser, so it's a little wide. Usually you use two different colors and it is easy to switch which color you want on the RS. The WS has the exact opposite colors, so it's good for reversible stuff. The lame part is that it's tedious because it's essentially knit 1 perl 1 the whole time.
I couldn't really find anything about the cast-on in the first 15 seconds I looked around the web, so for mine I had to wing it. I figured out two ways to make this work. Both start the same way. Make your slip-knot in MC1, knot it around your needles, then make your slip knot in MC2 and knot that around your needles, so they're next to each other.
The first cast-on produces a clean color on either side. As the two colors dangle, grab MC1 and cast on one stitch. Then reach around MC1 and grab MC2 and cast on your next stitch. Then grab MC1 (don't reach around MC2) and cast on a stitch. Keep going until you have the requisite number of stitches.
The second type of cast-on (which I ended up using) produces a cool zipper style effect. For this, reach through the dangling threads of MC2 and grab MC1, then cast on a stitch. Again, reach through MC1 and grab MC2 and cast on a stitch. Lather, rinse, repeat.
Now we actually knit. Your needles should look like this:
>--XOXOXOXOXOXOXOXOXOXOXOXOXOXO---
When you look at this, reading from right to left, the "O" will end up on the side facing you, the "X" will end up on the other side. So to maintain a solid sheet of color, you will want to stack an "O" on top of an "O" and an "X" on top of an "X". To begin, you knit an "O" using just the "O" colored strand. Then you pass both strands over the work as if you're going to perl, then perl using only the "X" colored strand. Then pass both back over the work. After this your work should look like
---XO--<
>--XOXOXOXOXOXOXOXOXOXOXOXOXOXO
XOXOXOXOXOXOXOXOXOXOXOXOXOXO
Just continue that way all the way across and you'll end up with
---XOXOXOXOXOXOXOXOXOXOXOXOXOXO--<
O O O O O O O O O O O O O O
The "X"s will have naturally migrated their way to the other side. Turn the needle around (where you see the "X"s but not the "O"s) and continue until you have this:
---XOXOXOXOXOXOXOXOXOXOXOXOXOXO--<
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
It's important to note that the front and back stitches need to be opposite colors. If you don't you'll end up having carries which end up ugly and not reversible. If it helps, group each pair of stitches in your mind. One of these is on the side facing you, the other is on the other side. Each pair has to have each color.
---XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO--<
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
It may not make much sense here, but it'll make more sense when you do it. Now having a piece that's MC1 on one side, and MC2 on another is cool and all, but you'll want to spice it up a bit. To change which color is on which side, swap the colors that you knit and perl with. For example, say we wanted a three stitch border and our needle looked like this:
>--XOXOXOXOXOXOXOXOXOXOXOXOXOXO---
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
We'd do our first 3 stitches along with their back-side pair
---XOXOXO--<
>--XOXOXOXOXOXOXOXOXOXOXO O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
Then we'd knit our next stitch, but we'd swap "O" and "X". We'd keep swapping them all the way until we're three pairs from the other side.
---OXOXOXOXOXOXOXOXXOXOXO--<
>--XOXOXO O O O O O O O O O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
Then for the remainder of the row, un-swap them.
---XOXOXOOXOXOXOXOXOXOXOXXOXOXO--<
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
Do the same thing on the next row.
>--OXOXOOXOXOXOXOXOXOXOXXOXOXOX---
O O O X X X X X X X X O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
And again and again
>--OXOXOOXOXOXOXOXOXOXOXXOXOXOX---
O O O X X X X X X X X O O O
O O O X X X X X X X X O O O
O O O X X X X X X X X O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
It's really hard to explain with crappy Ascii-art, but if you bust out a pair of needles and try it out, it really makes sense.
For my scarf, I also picked an ambitious color pattern. I'm using blue and white Alpaca yarn with 25 stitches of each color cast on with size 11 needles. The entire scarf is about 10 inches wide.
For each stitch, I look at the the stitch that will be below it and the stitches on either side of that one. That ends up being the first and third on my left needle, and the stitch below the second on my right needle. If they're all the same, I knit the master color for that side. Otherwise there will be 1 of one color ("A") and 2 of another color ("B"). I knit color "A". Like always, perl is the opposite of the knit. At the ends you just wrap around and look at the other side. It's actually pretty easy once you do a row, and there's only so many combinations: AAA, AAB, ABA, ABB, BAA, BAB, BBA, BBB. Six of those (AAB through BBA) are simple (B, B, A, B, A, A). The others just make me look at my first few rows the first time I hit one on a row. After a while it's second nature.
My first row was completely random, and the pattern itself generates some pretty complex organization out of that. For example:
X.X..X.XX.X.XXX.XX.X.XX.XX.
X.XXXX....X..X.....X.......
X..XX.XXXXXXXXXXXXXXXXXXXXX
.XX....XXXXXXXXXXXXXXXXXXXX
...XXXX.XXXXXXXXXXXXXXXXXX.
XXX.XX...XXXXXXXXXXXXXXXX.X
XX....XXX.XXXXXXXXXXXXXX...
..XXXX.X...XXXXXXXXXXXX.XXX
XX.XX..XXXX.XXXXXXXXXX...X.
You can start to see a bunch of self-arranging triangles. The further you go, the more structured the triangles get. If you're interested in this kind of stuff, it's called "Cellular Automata" and there's a pretty cool Java applet demonstrating it at http://math.hws.edu/xJava/CA/ and more info at http://cell-auto.com/
Anyway, I'll post a picture when I get around to it.
Double-Sided Stockinette (hereafter "DSS" because typing "Double-Sided Stockinette" takes way too long and I'm tired of typing "Double-Sided Stockinette") is surprisingly easy. DSS produces a finished material that's twice as thick and looks like stockinette on both sides (I think it was named after the inventor: Mrs. DSS). It seems to end up being a little looser, so it's a little wide. Usually you use two different colors and it is easy to switch which color you want on the RS. The WS has the exact opposite colors, so it's good for reversible stuff. The lame part is that it's tedious because it's essentially knit 1 perl 1 the whole time.
I couldn't really find anything about the cast-on in the first 15 seconds I looked around the web, so for mine I had to wing it. I figured out two ways to make this work. Both start the same way. Make your slip-knot in MC1, knot it around your needles, then make your slip knot in MC2 and knot that around your needles, so they're next to each other.
The first cast-on produces a clean color on either side. As the two colors dangle, grab MC1 and cast on one stitch. Then reach around MC1 and grab MC2 and cast on your next stitch. Then grab MC1 (don't reach around MC2) and cast on a stitch. Keep going until you have the requisite number of stitches.
The second type of cast-on (which I ended up using) produces a cool zipper style effect. For this, reach through the dangling threads of MC2 and grab MC1, then cast on a stitch. Again, reach through MC1 and grab MC2 and cast on a stitch. Lather, rinse, repeat.
Now we actually knit. Your needles should look like this:
>--XOXOXOXOXOXOXOXOXOXOXOXOXOXO---
When you look at this, reading from right to left, the "O" will end up on the side facing you, the "X" will end up on the other side. So to maintain a solid sheet of color, you will want to stack an "O" on top of an "O" and an "X" on top of an "X". To begin, you knit an "O" using just the "O" colored strand. Then you pass both strands over the work as if you're going to perl, then perl using only the "X" colored strand. Then pass both back over the work. After this your work should look like
---XO--<
>--XOXOXOXOXOXOXOXOXOXOXOXOXOXO
XOXOXOXOXOXOXOXOXOXOXOXOXOXO
Just continue that way all the way across and you'll end up with
---XOXOXOXOXOXOXOXOXOXOXOXOXOXO--<
O O O O O O O O O O O O O O
The "X"s will have naturally migrated their way to the other side. Turn the needle around (where you see the "X"s but not the "O"s) and continue until you have this:
---XOXOXOXOXOXOXOXOXOXOXOXOXOXO--<
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
It's important to note that the front and back stitches need to be opposite colors. If you don't you'll end up having carries which end up ugly and not reversible. If it helps, group each pair of stitches in your mind. One of these is on the side facing you, the other is on the other side. Each pair has to have each color.
---XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO-XO--<
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
It may not make much sense here, but it'll make more sense when you do it. Now having a piece that's MC1 on one side, and MC2 on another is cool and all, but you'll want to spice it up a bit. To change which color is on which side, swap the colors that you knit and perl with. For example, say we wanted a three stitch border and our needle looked like this:
>--XOXOXOXOXOXOXOXOXOXOXOXOXOXO---
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
We'd do our first 3 stitches along with their back-side pair
---XOXOXO--<
>--XOXOXOXOXOXOXOXOXOXOXO O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
Then we'd knit our next stitch, but we'd swap "O" and "X". We'd keep swapping them all the way until we're three pairs from the other side.
---OXOXOXOXOXOXOXOXXOXOXO--<
>--XOXOXO O O O O O O O O O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
Then for the remainder of the row, un-swap them.
---XOXOXOOXOXOXOXOXOXOXOXXOXOXO--<
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
Do the same thing on the next row.
>--OXOXOOXOXOXOXOXOXOXOXXOXOXOX---
O O O X X X X X X X X O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
And again and again
>--OXOXOOXOXOXOXOXOXOXOXXOXOXOX---
O O O X X X X X X X X O O O
O O O X X X X X X X X O O O
O O O X X X X X X X X O O O
O O O O O O O O O O O O O O
O O O O O O O O O O O O O O
It's really hard to explain with crappy Ascii-art, but if you bust out a pair of needles and try it out, it really makes sense.
For my scarf, I also picked an ambitious color pattern. I'm using blue and white Alpaca yarn with 25 stitches of each color cast on with size 11 needles. The entire scarf is about 10 inches wide.
For each stitch, I look at the the stitch that will be below it and the stitches on either side of that one. That ends up being the first and third on my left needle, and the stitch below the second on my right needle. If they're all the same, I knit the master color for that side. Otherwise there will be 1 of one color ("A") and 2 of another color ("B"). I knit color "A". Like always, perl is the opposite of the knit. At the ends you just wrap around and look at the other side. It's actually pretty easy once you do a row, and there's only so many combinations: AAA, AAB, ABA, ABB, BAA, BAB, BBA, BBB. Six of those (AAB through BBA) are simple (B, B, A, B, A, A). The others just make me look at my first few rows the first time I hit one on a row. After a while it's second nature.
My first row was completely random, and the pattern itself generates some pretty complex organization out of that. For example:
X.X..X.XX.X.XXX.XX.X.XX.XX.
X.XXXX....X..X.....X.......
X..XX.XXXXXXXXXXXXXXXXXXXXX
.XX....XXXXXXXXXXXXXXXXXXXX
...XXXX.XXXXXXXXXXXXXXXXXX.
XXX.XX...XXXXXXXXXXXXXXXX.X
XX....XXX.XXXXXXXXXXXXXX...
..XXXX.X...XXXXXXXXXXXX.XXX
XX.XX..XXXX.XXXXXXXXXX...X.
You can start to see a bunch of self-arranging triangles. The further you go, the more structured the triangles get. If you're interested in this kind of stuff, it's called "Cellular Automata" and there's a pretty cool Java applet demonstrating it at http://math.hws.edu/xJava/CA/ and more info at http://cell-auto.com/
Anyway, I'll post a picture when I get around to it.
0 Comments:
Post a Comment